Explain What Is The Purpose Of Automatic Gain Control (AGC) In EDFA?A. Compensates Gain TiltB. Balances Transient PowerC. Serves As A Variable Optical AttenuatorD. Serves As A Substitute To Gain Flattening Filter

⟩ Explain What is the purpose of automatic gain control (AGC) in EDFA?A. Compensates gain tiltB. Balances transient powerC. Serves as a variable optical attenuatorD. Serves as a substitute to gain flattening filter

B.Balances transient power

Is this answer helpful?
0 Yes | 0 No

246 views

A client has a network with wireless and wired users. The wired users runmission-critical bandwidth-sensitive applications. The wireless users access web-based support portalswithin the central office.Given only this information, which Cisco NAC Appliance solution would provide the most fault-tolerantoption for this client?A. one Cisco NAM and one in-band highly available Cisco NAS clusterB. one load-balanced highly available Cisco NAM cluster and one out-of-band highly available Cisco NASclusterC. one highly available Cisco NAM cluster, one out-of-band highly available Cisco NAS cluster, and onein-band Cisco NASD. one highly available Cisco NAM cluster and one in-band highly available Cisco NAS cluster

Based on a Boolean order of precedence, how would Cisco NAC Appliance evaluate the following rule?AdAwareLogRecent&(NorAVProcessIsActiveymAVProcessIsActive)A. (The Norton Antivirus is active and there is a recent Ad Aware log entry) or (the Symantec antivirusprocess is active).B. There is a recent Ad Aware log entry, the Norton Antivirus is active, and the Symantec antivirus process isactive.C. (Either the Norton Antivirus or the Symantec antivirus process is active) and (there is a recent Ad Awarelog entry).D. There is a recent Ad Aware log entry or the Norton Antivirus is active, or the Symantec antivirus process isactive.

The NAS is configured to autogenerate an IP address pool of 30 subnets with a netmask of /30, beginning at address 192.168.10.0. Which IP address is leased to the end-user host onthe second subnet?A. 192.168.10.4B. 192.168.10.5C. 192.168.10.6D. 192.168.10.7

Tell me After you implement a network scan and view the report, you notice that aplug-in did not access any of its dependent plug-ins. What did you forget to do?A. enable the Dependent Plug-in check box on the General Tab formB. configure dependent plug-in support when you mapped the Nessus scan check to the Nessus plug-in ruleC. install dependent plug-ins when you updated the Cisco NAC Appliance plug-in libraryD. load the dependent plug-ins for that plug-in in the Plug-in Updates form

Tell me Which three components comprise a Cisco NAC Appliance solution? (Choosethree.)A. a NAC-enabled Cisco routerB. a Linux server for in-band or out-of-band network admission controlC. a Linux server for centralized management of network admission serversD. a Cisco router to provide VPN servicesE. a read-only client operating on an endpoint deviceF. a NAC-enabled Cisco switch

How to ensure that the Cisco NAS has the most recent version of theCisco NAA to install on user devices?A. Each time the Cisco NAA is upgraded, the Cisco NAM automatically downloads the new version of CiscoNAA to all Cisco NAS servers.B. From the Cisco NAS Web Admin Console, enable Cisco NAA autoupdate on the Administration >Software Update form.C. The Cisco NAA is upgraded directly to each Cisco NAS using the Upgrade Server form available on theCisco NAM web console GUI.D. Configure the Cisco NAS by selecting which Cisco NAA to upgrade in the Cisco NAA Upgrade form.

Explain When configuring the Cisco NAM to implement Cisco NAA requirementchecking on client machines, what is the next step after configuring checks and rules?A. retrieve updatesB. require the use of the Cisco NAAC. configure session timeout and traffic policiesD. map rules to requirementE. configure requirements

Question and Answer:

Home CCIE Certification