⟩ A description of the fundamental elements that are required to make a digibox. I assume that they all record nowadays?
Please share your answers.
Question and Answer:
Home Electronics Engineering
- Share
Popular Answers:
* There is no answer to the above question yet.
More Questions for you:
Do you know what energy systems engineers do?
A given power supply is capable of providing 6 A for 3.5 h. Its ampere-hour rating is A. 0.58 Ah B. 2.1 Ah C. 21 Ah D. 58 Ah
A power supply produces a 0.6 W output with an input of 0.7 W. Its percentage of efficiency is A. 8.57% B. 42.85% C. 4.28% D. 85.7%
A certain appliance uses 350 W. If it is allowed to run continuously for 24 days, how many kilowatt-hours of energy does it consume? A. 20.16 kWh B. 201.6 kWh C. 2.01 kWh D. 8.4 kWh
In 0.025 W, there are A. 25 kW B. 0.00025 mW C. 2,500 µW D. 25 mW
When the pointer of an analog ohmmeter reads close to zero, the resistor being measured is A. overheated B. shorted C. open D. reversed
A 33 half-watt resistor and a 330 half-watt resistor are connected across a 12 V source. Which one(s) will overheat? A. 33 B. 330 C. both resistors D. neither resistor
A 68 resistor is connected across the terminals of a 3 V battery. The power dissipation of the resistor is A. 132 mW B. 13.2 mW C. 22.6 mW D. 226 mW
A 75 load uses 2 W of power. The output voltage of the power supply is approximately A. 120 V B. 1.2 V C. 12 V D. 6 V
When the current through a 12 k resistor is 8 mA, the power is A. 7.68 mW B. 768 mW C. 7.68 W D. 76.8 W
