⟩ What is TDM?
Digital process that can be applied when the data rate capacity of the transmission medium is greater than the data rate required by the sending and receiving devices.
Question and Answer:
Home Network Engineer
- Share
Popular Answers:
* There is no answer to the above question yet.
More Questions for you:
Crude oil is pumped by a __________ pump. A. gear B. centrifugal C. screw D. reciprocating
Operating condition in the electrical dehydrators for crude oil is about A. 6.5 kgf/Cm2 & 95°C. B. 1 atm. & 110 °C. C. 20 kgf/cm2 & 110°C. D. 50 atm. and 150°C.
Solvent used in the deasphalting process is A. furfurol B. phenol C. propane D. hexane
Visbreaking process is used mainly for making A. high cetane diesel B. high octane gasoline C. fuel oil D. smoke free kerosene
Viscosity index of a lubricating oil A. is the measure of its flash point. B. is the measure of variation of viscosity with temperature. C. should be low. D. none of these.
Smoke point of a test sample of kerosene is found to be 15 mm. On removal of __________ from it, the smoke point rises to 25 mm. A. n-paraffins B. olefins C. aromatics D. none of these
__________ is not an important refinery process for upgrading the quality of lubricating oil. A. Deoiling B. Solvent refinning C. Clay treatment D. Hydrotreatment
Pick out the undesirable property for a solvent meant for dewaxing of lube oil. A. Complete miscibility with oil. B. High solubility of wax in the solvent. C. Both (a) and (b). D. Neither (a) nor (b).
Which of the following is used as a catalyst in fluidised bed catalytic cracking? A. Silica-magnesia B. Silica-alumina C. Bentonite clays D. All (a), (b) and (c)
Casing head gasoline is the liquid A. butane. B. propane. C. natural gas. D. gasoline separated from wet natural gas by compression.
