⟩ Tell me the possible ways of data exchange?
☛ Simplex
☛ Half-duplex
☛ Full-duplex.
Question and Answer:
Home Network Engineer
- Share
Popular Answers:
* There is no answer to the above question yet.
More Questions for you:
Furfural solvent extraction is used for upgrading (by dissolving aromatics) A. naphtha B. lubricating oils C. wax D. cracking feedstock
Tanks used for the storage of petroleum products (which are inflammable) should be painted with a __________ paint. A. black B. white C. red D. yellow
Which of the following has the lowest viscosity (at a given temperature) of all? A. Naphtha B. Kerosene C. Diesel D. Lube oil
Solution used in Doctor's treatment for the removal of mercaptans is A. sodium hydroxide B. sodium plumbite C. cupric chloride D. potassium isobutyrate
__________ determination is not a very significant and important test for gasoline. A. Gum & sulphur content B. Viscosity C. Octane number D. Reid vapor pressure
Catalyst used in catalytic reforming is A. platinum on alumina B. nickel C. iron D. aluminium chloride
Octane number of gasoline is a measure of its A. resistance to knock. B. ignition delay. C. ignition temperature. D. smoke point.
Cetane number of diesel used in trucks may be about A. 50 B. 14 C. 35 D. 85
Paraffin base crude oil as compared to asphalt base crude gives A. higher yield of straight run gasoline. B. higher octane number gasoline. C. lower viscosity index lube oil. D. poorer yield of lube oil.
Catalyst used in the catalytic polymerisation is A. phosphoric acid on kieselghur B. aluminium chloride C. nickel D. vanadium pentaoxide
