⟩ Thermofer catalytic cracking process is a __________ process. A. fixed bed B. moving bed C. fluidised bed D. non-catalytic
Option D
Question and Answer:
Home Petroleum Engineering
- Share
Popular Answers:
* There is no answer to the above question yet.
More Questions for you:
Molecular weight of crude oil is in the range of A. 100-120 B. 230-250 C. 450-550 D. 600-850
Crude petroleum oil is a __________ fuel. A. primary B. fossil C. both (a) & (b) D. secondary
Pick out the correct statement. A. Paraffins have higher octane number than corresponding iso-paraffin. B. Paraffins have lower smoke point than aromatics. C. Suitability of kerosene as a fuel & as an illuminant may be determined by char value test. D. Aviation fuel should have very high cloud point.
Octane numbers of motor gasoline used in India and America are respectively A. 87 & 94 B. 94 && 87 C. 94 && 100 D. 83 && 100
Catalyst used in the isomerisation is A. aluminium chloride B. alumina C. nickel D. phosphoric acid
Crude oils containing more than __________ kg of total salts (expressed in terms of NaCl) per thousand barrel is called a 'salty crude'. A. 1 B. 5 C. 15 D. 25
Pick out the correct statement about catalytic polymerisation. A. H2SO4 polymerisation process gives gasoline rich in unsaturates. B. In H2SO4 polymerisation, H3PO4 is always used with 2% steam to prevent meta & ortho H3PO4 formation, which are inactive. C. both (a) and (b) D. neither (a) nor (b)
Reid vapour pressure of gasoline is the measure of its A. pour point B. cloud point C. vapour locking tendency D. carbon residue
Boiling range of motor gasoline is an indication of the A. case of starting B. rate of acceleration C. vapour locking tendency D. all (a), (b) and (c)
Performance number of a liquid fuel is related to its A. wax content B. spontaneous ignition temperature C. knocking tendency D. sulphur content
