⟩ What is a spot color? a Any color other than CMYK. b Any color with premixed inks that requires separate printing plates. c Any color that is produced by mixing CMYK. d None of the above.
Please share your answers.
Question and Answer:
Home CorelDraw
- Share
Popular Answers:
* There is no answer to the above question yet.
More Questions for you:
The maximum normal stress theory is used for A. brittle materials B. ductile materials C. plastic materials D. non-ferrous materials
The bearings of heavy series have capacity __________ over the medium series. A. 10 to 20% B. 20 to 30% C. 30 to 40% D. 40 to 50%
Two shafts A and B under pure torsion are of identical length and identical weight and are made of the same material. The shaft A is solid and the shaft B is hollow. We can say that A. shaft B is better than shaft A B. shaft A is better than shaft B C. both the shafts are equally good
Which of the following statement is correct for gears? A. The addendum is less than dedendum B. The pitch circle diameter is equal to the product of module and number of teeth C. The pitch circle is always greater than the base circle D. all of the above
The constant factor in case of R10 series of preferred numbers is A. 1.06 B. 1.12 C. 1.26 D. 1.58
In order to obtain the bolts of uniform strength, an axial hole is drilled through the head as far as the threaded portion such that the area of shank becomes equal to the root area of the thread. A. True B. False
The value of stress concentration factor depends upon A. material of the part B. geometry of the part C. material and geometry of the part D. none of these
The ball bearings are provided with a cage A. to reduce friction B. to facilitate slipping of balls C. to prevent the lubricant from flowing out D. to maintain the balls at a fixed distance apart
The velocity of sliding __________ the distance of the point of contact from the pitch point. A. is directly proportional to B. is inversely proportional to C. is equal to cos φ multiplied by D. does not depend upon
A locking device in which the bottom cylindrical portion is recessed to receive the tip of the locking set screw, is called A. castle nut B. jam nut C. ring nut D. sawn nut
