⟩ WhatTheFont?! lets you capture and submit a font sample for quick and easy identification. a Yes b No
a: Yes
a: Yes
The radial distance of a tooth from the pitch circle to the top of the tooth is called A. dedendum B. addendum C. clearance D. working depth
A steel containing more than 0.8% carbon is known as eutectoid steel. A. Yes B. No
A transmission shaft includes A. counter shaft B. line shaft C. over head shaft D. all of these
Soderberg relation is based on __________ of the material whereas all other failure relation for dynamic loading are based on ultimate strength of the material. A. elastic strength B. yield strength C. shear strength
A locking device extensively used in marine type connecting rod ends is a A. jam nut B. castle nut C. sawn nut D. ring nut
Circumferential joint in boilers is used to get the required length of a boiler. A. True B. False
When the bearing is subjected to large fluctuations of load and heavy impacts, the bearing characteristic number should be __________ the bearing modulus. A. 5 times B. 10 times C. 15 times D. 20 times
In an ordinary bolt, the effect of the impulsive loads applied axially is concentrated on the cross-sectional area at the root of the threads. A. Yes B. No
A column is known as a long column if the slenderness ratio is A. 40 B. 50 C. 70 D. 100
The material used for brake lining should have __________ coefficient of friction. A. low B. high