⟩ Which of the following options will you set to enable or disable Dynamic Guides? a Layout -> Dynamic Guides b Window -> Dynamic Guides c Tools -> Dynamic Guides d View -> Dynamic Guides
c: Tools -> Dynamic Guides
Question and Answer:
Home CorelDraw
- Share
Popular Answers:
* There is no answer to the above question yet.
More Questions for you:
A steel containing more than 0.8% carbon is known as eutectoid steel. A. Yes B. No
A transmission shaft includes A. counter shaft B. line shaft C. over head shaft D. all of these
Soderberg relation is based on __________ of the material whereas all other failure relation for dynamic loading are based on ultimate strength of the material. A. elastic strength B. yield strength C. shear strength
A locking device extensively used in marine type connecting rod ends is a A. jam nut B. castle nut C. sawn nut D. ring nut
Circumferential joint in boilers is used to get the required length of a boiler. A. True B. False
When the bearing is subjected to large fluctuations of load and heavy impacts, the bearing characteristic number should be __________ the bearing modulus. A. 5 times B. 10 times C. 15 times D. 20 times
In an ordinary bolt, the effect of the impulsive loads applied axially is concentrated on the cross-sectional area at the root of the threads. A. Yes B. No
A column is known as a long column if the slenderness ratio is A. 40 B. 50 C. 70 D. 100
The material used for brake lining should have __________ coefficient of friction. A. low B. high
In unilateral system of tolerance, the tolerance is allowed on A. one side of the actual size B. one side of the nominal size C. both sides of the actual size D. both sides of the nominal size
