Under the supervision of the course instructor (faculty or contract instructor ), you may be assigned duties related to marking, tutorial attendance and participation, office hours and similar duties depending on your particular assignment.
Vibration damper ………. a. controls the torsional vibrations b. drives the pulley c. dampens the engine speed d. reduces the speed of the flywheel
For petrol engines the nominal compression ratio will vary between a. 1 to 21 b. 18 to 211 c. 1 to 51 d. 7.5 to 8.51
The size of intake valve is a. Smaller than that of the exhaust valve b. Equal to that of the exhaust valve c. Larger than that of the exhaust valve d. Not depending upon the size of exhaust valve
Tell me what is the most complicated repair job you’ve handled? What did you learn from it?
Do you know the Basic Difference Between Bs2 And Bs3 Engine?
Explain me what Is Dtsi? Why This Technology Is Used In Motor Bikes?
The heat is added in the cycle at a. Constant pressure b. Constant volume c. Approximately constant pressure and constant volume
The maximum pressure of air at the end of compression in diesel engines is about a. 10 Kg/cm2 b. 100 Kg/cm2 c. 300 Kg/cm2 d. 30 Kg/cm2
As compression ratio in an engine goes up, the octane requirements of the fuel a. Goes down b. Goes up c. Stay about the same
The range of gear ratios in a vehicle depends on a. The ratio of engine h.p to laden weight of vehicle b. Max. engine torque / wt. of vehicle c. Only on the laden weight of vehicle d. The power to weight ratio of engine
rendc.org
Whether it is technological solutions or user-oriented innovations, We have put together for you the best sources of HR Interview Questions and Answers, Tech Ideas, and Programming Tutorials."
Get all the latest information on rendc.org
© 2022 | All rights reserved.
RENDC
welcome to www.rendc.org
