Plumber

I have had experience installing a hot water system, but the courses I studied didn't go into depth , nd also didn't include other water based heating systems.

Not in concrete floor, but I have helped run pex tubing a few times, just not in a concrete floor.

The lowest point in a drainage system where the interior drainage pipe meet and are conveyed into the sewer is referred as Building Drain.

I have been at college for 3 years wile completing level 1, 2 and a plumbers mate course which has trained me in several aspects including some gas, fitting a bathroom, using a power flusher, and working with different pipes.

While the conventional water heating system is in a league of its own, the fact that energy is being consumed constantly is a definite downside to using one. If saving energy is what a client wants, then I would suggest a tank-less water heater that uses energy only when there is a requirement for hot water.

First step is to pass hot water from the pipes, if the issue persists, we use chemical drain openers and if those don’t work then we go to manual methods and sometimes we need to scrape or even replace the whole piping or a section.

It’s time to pull out your old performance appraisals and boss’s quotes. This is a great way to brag about yourself through someone else’s words: “My boss has told me that I am the best designer he has ever had. He knows he can rely on me, and he likes my sense of humor.”

You can buy a Delta single handle faucet repair kit with a tool for maybe five to seven bucks. It has all the instructions and is very easy to do.

To avoid bathroom plumbing maintenance you can use the following tips

• Once a week flushes out the drainage pipes with hot water

• Apply pipe shield to drain lines once each month to keep soap scum building up and causing clogs

• To prevent further damage to the fixtures and faucets repair leaky faucets

• Showers and tubs should be fitted with strainers that can catch hair and soap chips

• Use vinegar to remove mineral deposit in your shower head, by placing a vinegar in a plastic bag and leave it over the shower head overnight. Take only 1 cup of vinegar.

• Throw the waste in wastebasket like tissue paper, cotton ball, etc.

Angle stop is a shutoff valve between the water supply pipe and the fixture it supplies. It is used to shut off water to a fixture in case of failure, repair or leakage.

2 years back when I worked as a journey man, we received a call. I and the senior journeyman went to resolve the issue. There was in in-wall leakage and we had to replace the piping. The customer insisted that we repair it. It took a lot of time to explain to the customer that the old piping was irreparable and even if we managed to fix it, we wouldn’t get the pressure right. With practical demonstrations we were able to convince him but he was very pleased by the work at finish.

Is the top of the flange even (or close to even) with the finished floor? If it to low – then use two wax rings. One regular wax ring on the bottom and one (or more) with the plastic horn insert on top. ) I have seen leaks like you describe if the glued flange is not really glued in all the way. Take a look at that – if your floor and flange is flush. Sometimes you need to shim the toilet if the floor is uneven or the flange is to high.

Yes, I have installed showers with multiple shower heads. This does pose a problem with water pressure but it can be managed by installing a pressure pump which can cater to several showers depending on its gauge and size.

Being unfamiliar with the organisation will spoil your chances with 75% of interviewers, according to one survey, so take this chance to show you have done your preparation and know the company inside and out. You will now have the chance to demonstrate that you’ve done your research, so reply mentioning all the positive things you have found out about the organisation and its sector etc. This means you’ll have an enjoyable work environment and stability of employment etc – everything that brings out the best in you.

• Avoid awkward body positions, and take break every 30 minutes

• Learn safe lifting techniques

• Wear appropriate footwear and gloves while handling sewage plant or metal pipes

• Keep tools and equipment’s in working condition, to avoid any unexpected accident due to inoperative tools

• To avoid electric shock use only power tools that can be used in a wet environment and have GFCI (Ground fault circuit interrupter).

• Keep work area clear

Yes, like I said earlier if I cannot work anymore, physically, do to old age or whatever it may be I would love too. If I am working, I would only open a business if I had a good partner I could trust.

The home remedies to clear clogged drain is:

• Take half a cup of baking soda and pour down the drain, and then pour half a cup of vinegar. After 15 minutes, flush out the drain with hot water

• Add equal parts of salt, vinegar and baking soda. After one hour pour hot water into it

• Add half a cup of salt and equal amount of baking soda, sprinkle it into the drain and then flush it with hot water

keep the size of the water supply line 3/4 size all the way up until you tie-in to the valve for maximum water volume and pressure.

The washing machine line could be connected to close to the “suds rinse zone”, meaning the washer waste ties into the waste or soil line of another fixture to close downstream from the problem fixture. What is happening is the water is rushing by the suds at a high velocity, pushing ahead of the suds. Because the fixture is the closest place of relief, the suds will come up into the fixture, even a toilet. The code requires that a washing machine, kitchen sink, shower, and dishwasher line be connected at least 5′ downstream from any fixture branch. This could be just one of many possibilities for the bubbling and backup.-Bill Dwight,

Try make it as leak proof as possible and inform my boss and let him make the decision due to its him signing of the work because im nota cert plumber yet.