61⟩ Do you know what is mineral fibers?
Glass fibers are produced by combining silica sand, limestone, and certain other minerals.
“Textile Engineer related Frequently Asked Questions by expert members with professional career as Textile Engineer. These list of interview questions and answers will help you strengthen your technical skills, prepare for the new job interview and quickly revise your concepts”
Glass fibers are produced by combining silica sand, limestone, and certain other minerals.
Color within a color range perceived as being fashionable.
Nylon is thermoplastic, resilient, elastic and very strong. It is used for a wide variety of apparel, have furnishings and industrials products.
Chevron is a V-shaped stripes.
Blind hem means the Sewing a hem invisibly with hand or machine stitches.
Casing is a folded-over edge of garment or area through which elastic or ribbon is threaded.
Soap is a metallic salt of saturated or unsaturated higher fatty acid. There may be Pb, Mg, Ca or other metallic salt.
French Seam is narrow seam within a seam, used on fabrics which ravel easily .
The affinity of dye to the fibre is known as dyeing affinity.
Clean finish means the method for finishing the raw edges of pockets, hems or seams.
Possibly, but keep in mind:
1, the thread and zipper will remain the original color;
2. the trim issue ;
3. the stress of the warm-water-and-agitation process.
Normal wash / Garments wash/ Rinse wash, Pigment wash, Caustic wash, Silicon wash, Stone wash, Enzyme wash, Stone Enzyme wash, Acid wash, Bleach wash.
Ring frame, mule frame.
Wool, Silk, Hair.
If the textile goods become uneven dyeing and insoluble for using then the color has to be distorted. The process to destroying of removing dye or finish form fibres or fabrics is known as stripping.
Grade means to reduce the bulk of enclosed seams by trimming the individu al seam allowances different widths, clipping inward curves and corners, notching convex curves, and trimming away excess fabric at outward corners.
The ratio of the force to the area of shearing is known as shear stress.
A material to which dyes and chemicals may be applied.
To remove the impurities of hard water by some desirable process is known as water softening.
The first purpose is to remove dirt, dust, impurities of garments thus achieve wash look appearance and softness.
The other purpose is to bring faded look, old look, tinted or over dyed affect.
To increase color fastness, wash fastness properties no possibility of further shrinkage of wash garments.