Electrician Assistant

If you are new to the electrical trade or are applying for an apprenticeship, you will probably be asked this question. Employers ask this question because they want to hear your motivations and goals so that can be sure that you really have an interest in the field.

The Maximum power transfer theorem explains about the load that a resistance will extract from the network. This includes the maximum power from the network and in this case the load resistance is being is equal to the resistance of the network and it also allows the resistance to be equal to the resistance of the network. This resistance can be viewed by the output terminals and the energy sources can be removed by leaving the internal resistance behind.

The induced emf developed when the rotating conductors of the armature between the poles of magnet, in a DC motor, cut the magnetic flux, opposes the current flowing through the conductor, when the armature rotates, is called back emf. Its value depends upon the speed of rotation of the armature conductors. In starting, the value of back emf is zero.

Be prepared to quote a realistic salary expectation for the position that you are applying for. Use your knowledge about the profession and the company to make a request that meets your needs while also being reasonable.

Along with qualifications, an employers will want to know if you have any particular specializations. For example, some electricians specialize in electrical systems and controls, wiring, or electro-mechanical repairs. Others may have particular expertise in reading blueprints or general troubleshooting.

You'll find this question near the end of the interview. If you feel you have something special to offer that didn't get mentioned or prompted in the interview then say it here. Avoid using cliched buzzwords like "hard-working" and "fast learner" and "gets along well with others"; the employer wants to hear something different and unique, so think about this question the most. Use it as your opportunity to really sell yourself to the hiring manager.

Speak about specifics that relate to the position you are applying for. If you do not have specific experience, get as close as you can.

If you are being asked this question from your employer then you can explain your experience. Tell the employer what responsibilities you were performing during your job. You can tell what programs you developed and what modules you worked on. What were your achievements regarding different programs.

I have been working with computers since 2001. I also have a degree in network support/computer repair. I have built my last 3 computers, have work with Dell as an employee. So I have around 15 years experience working with computers.

In order to score in this interview question, a efficient way is to give a list of qualities and skills that is suitable with an admin assistant position. You can start with "Firstly, an admin must have effective methods, secondly, give job the priority, thirdly, create a good team work" etc. Remember that the duty of an admin assistant is to communicate with several of people, so excellent communication skills and a good personality are required.

Generator and alternator are two devices, which converts mechanical energy into electrical energy. Both have the same principle of electromagnetic induction, the only difference is that their construction. Generator persists stationary magnetic field and rotating conductor which rolls on the armature with slip rings and brushes riding against each other, hence it converts the induced emf into dc current for external load whereas an alternator has a stationary armature and rotating magnetic field for high voltages but for low voltage output rotating armature and stationary magnetic field is used.

Following motors are used: -

• Vacuum cleaners- Universal motor.

• Phonographic appliances - Hysteresis motor.

• Vending machines - Shaded pole motor.

• Refrigerators - Capacitor split phase motors.

• Rolling mills - Cumulative motors.

• Lathes - DC shunt motors.

• Power factor improvement - Synchronous motors

Employer will want to know if you have the right skills and credentials for the job. Mention your education, any relevant certifications, and experience from previous jobs that specifically pertain to an electrician's job.

• Forward Resistance: Resistance offered in a diode circuit, when it is forward biased, is called forward-resistance.

• DC or Static Resistance: DC resistance can be explained as the ratio of the dc-voltage across the diode to the direct current flowing through it.

• AC or Dynamic Resistance: It can be defined as the reciprocal of the slope of the forward characteristic of the diode. It is the resistance offered by a diode to the changing forward current.

Due to following reasons, AC systems are preferred over DC systems:

a. It is easy to maintain and change the voltage of AC electricity for transmission and distribution.

b. Plant cost for AC transmission (circuit breakers, transformers etc) is much lower than the equivalent DC transmission

c. From power stations, AC is produced so it is better to use AC then DC instead of converting it.

d. When a large fault occurs in a network, it is easier to interrupt in an AC system, as the sine wave current will naturally tend to zero at some point making the current easier to interrupt.

Slip can be defined as the difference between the flux speed (Ns) and the rotor speed (N). Speed of the rotor of an induction motor is always less than its synchronous speed. It is usually expressed as a percentage of synchronous speed (Ns) and represented by the symbol 'S'.

☛ Can you describe a time when your work was criticized?

☛ Tell me about an important issue you encountered recently.

☛ What are the qualities of a good leader?

☛ How well did your college experience prepare you for this job?

☛ What are three positive character traits you don't have?

☛ What have you done to support diversity in your unit?

☛ What support training would you require to be able to do this job?

☛ What type of work environment do you prefer?

☛ What do you think this position involves.

☛ What irritates you about other people?

Answer as sincerely as possible. Don't lie as if you are discovered, it shall be very bad situation.

Answer Electrician assistant interview questions pertaining to job qualifications and skill sets honestly. Make sure your eye contact with the interviewers during the interview.

☛ How do you evaluate your ability to handle conflict?

☛ What attracted you to this company?

☛ What have you been doing since your last job?

☛ What parts of your education do you see as relevant to this position?

☛ What is the difference between a good position and an excellent one?

Never interrupt - even where the question is obvious, wait for the interviewer to finish before your reply.

Make sure the experience is relevant. Be sure to discuss a very specific example.

☛ Situation in which you had to arrive at a compromise.

☛ What were the responsibilities of your last position?

☛ What negative thing would your last boss say about you?

☛ Where do you see yourself in five years time?

☛ What would you say are your strong points?