Quality Assurance Questions And Answers

1⟩ Do you know what are inspection points for a cable tray installation?

Material check as per approved spec, size and type, trays hook-up, proper distance structure, tray to tray i.e. power/control/and signal/low voltage and high voltage , support fixed strongly not shaking.

Is this answer helpful? 0 Yes | 0 No

Answer This Question

131 views

2⟩ What is what is schedule Q?

Schedule Q is an attachment to the contract, which is the provision of quality Assurance and control, Inspection and test plan.

Is this answer helpful? 0 Yes | 0 No

Answer This Question

160 views

3⟩ Tell me how do you determine the correct installation of flow orifice?

The orifice data (tag) shall be punched in the up stream of orifice , the data (tag) side shall be in the upstream of flow direction.

Is this answer helpful? 1 Yes | 0 No

Answer This Question

143 views

4⟩ Explain how validation activities should be conducted?

Validation activities should be conducted by following techniques

☛ Hire third party independent verification and validation

☛ Assign internal staff members that are not involved in validation and verification activities

☛ Independent evaluation

Is this answer helpful? 0 Yes | 0 No

Answer This Question

145 views

5⟩ Explain me a decision you made that wasn't popular and how you handled the negative feedback?

We introduced colour coding on machines based on their skill so as to minimise inspection time and concentrate on helping the least skill workers.

Is this answer helpful? 0 Yes | 0 No

Answer This Question

154 views

6⟩ Tell me when to start QA in a project?

A good time to start the QA is from the beginning of the project startup. This will lead to plan the process which will make sure that product coming out meets the customer quality expectation. QA also plays a major role in the communication between teams. It gives time to step up the testing environment. The testing phase starts after the test plans are written, reviewed and approved.

Is this answer helpful? 0 Yes | 0 No

Answer This Question

133 views

7⟩ Explain what is validation and verification in software testing?

In verification, all the key aspects of software developments are taken in concern like code, specifications, requirements and document plans. Verification is done on the basis of four things list of issues, checklist, walkthroughs and inspection meetings. Following verification, validation is done, it involves actual testing, and all the verification aspects are checked thoroughly in validation.

Is this answer helpful? 0 Yes | 0 No

Answer This Question

137 views

8⟩ Do you know what does the software QA document should include?

Software QA document should include

☛ Specifications

☛ Designs

☛ Business rules

☛ Configurations

☛ Code changes

☛ Test plans

☛ Test cases

☛ Bug reports

☛ User manuals, etc

Is this answer helpful? 0 Yes | 0 No

Answer This Question

124 views

9⟩ Tell us as a Quality Control Inspector, what keeps you motivated to always give your best work?

Pushing to achieve an outcome that is of Good quality and complying with standards.

Is this answer helpful? 0 Yes | 0 No

Answer This Question

146 views

10⟩ Explain what is difference between QA, QC?

Quality Assurance (QA): QA refers to the planned and systematic way of monitoring the quality of process which is followed to produce a quality product. QA tracks the outcomes and adjusts the process to meet the expectation.

Quality Control (QC): Concern with the quality of the product. QC finds the defects and suggests improvements. The process set by QA is implemented by QC. The QC is the responsibility of the tester.

Is this answer helpful? 0 Yes | 0 No

Answer This Question

139 views

11⟩ What is the basic responsibilities of a QA/QC personal?

To ensure execution of works and comply fully as per standard and approved speck.

Is this answer helpful? 0 Yes | 0 No

Answer This Question

129 views

12⟩ Tell me what are inspection points for cable laying?

material inspection as per approved materials, type and size, meggering, cable routing drawing, completion of cable route (tray conduit or trench etc) and cable numbering tags, cable bending, use of proper tools and equipment for cable pulling.

Is this answer helpful? 0 Yes | 0 No

Answer This Question

124 views

13⟩ What is an ITP?

ITP (INSPECTION & TEST PLAN) is a Document that defines the activities requiring inspection or test (witness hold points etc.) the controlling specifications the acceptance criteria the persons responsible and the record to be produced.

Is this answer helpful? 0 Yes | 0 No

Answer This Question

152 views

14⟩ Explain what are the main job duties and responsibilities of quality control systems manager employee?

Quality control systems manager responsibilities are to communicate quality control information to all relevant organizational departments, outside vendors, or contractors; document testing procedures, methodologies, or criteria; review statistical studies, technological advances, or regulatory standards and trends to stay abreast of issues in the field of quality control;

create and implement inspection and testing criteria or procedures; identify quality problems or areas for improvement and recommend solutions; monitor performance of quality control systems to ensure effectiveness and efficiency; produce reports regarding nonconformance of products or processes, daily production quality, root cause analyses, or quality trends; review and update standard operating procedures or quality assurance manuals; evaluate new testing and sampling methodologies or technologies to determine usefulness;

instruct staff in quality control and analytical procedures; analyze quality control test results and provide feedback and interpretation to production management or staff; oversee workers including supervisors, inspectors, or laboratory workers engaged in testing activities; coordinate the selection and implementation of quality control equipment such as inspection gauges; direct the tracking of defects, test results, or other regularly reported quality control data; direct product testing activities throughout production cycles; identify critical points in the manufacturing process and specify sampling procedures to be used at these points; stop production if serious product defects are present; verify that raw materials, purchased parts or components, in-process samples, and finished products meet established testing and inspection standards; review quality documentation necessary for regulatory submissions and inspections;

generate and maintain quality control operating budgets; collect and analyze production samples to evaluate quality; participate in the development of product specifications; instruct vendors or contractors on quality guidelines, testing procedures, or ways to eliminate deficiencies; confer with marketing and sales departments to define client requirements and expectations; monitor development of new products to help identify possible problems for mass production; audit and inspect subcontractor facilities including external laboratories; review and approve quality plans submitted by contractors.

Is this answer helpful? 0 Yes | 0 No

Answer This Question

141 views

15⟩ Tell me what is branch testing and what is boundary testing?

The testing of all the branches of the application, which is tested once, is known as branch testing. While the testing, which is focused on the limit conditions of the software is known as boundary testing.

Is this answer helpful? 0 Yes | 0 No

Answer This Question

131 views

16⟩ Tell me what is a 'USE' case and what does it include?

The document that describes, the user action and system response, for a particular functionality is known as USE case. It includes revision history, table of contents, flow of events, cover page, special requirements, pre-conditions and post-conditions.

Is this answer helpful? 0 Yes | 0 No

Answer This Question

114 views

17⟩ Explain me about a time when you have had to make a big decision, such as shutting down a production line. How did you come to the conclusion and how did you proceed?

When we had bad parts from a vendor and they did not meet our IPC standards. We didnt have any other parts on hand to replace the bad parts so we shut it down the good parts came in.

Is this answer helpful? 0 Yes | 0 No

Answer This Question

128 views

18⟩ Basic Inspector QA/QC Job Interview Questions

☛ Please tell me about your self?

☛ Where would you like to be in 3 years? 5 years?

☛ What tertiary qualifications have you attained that related to your Quality inspector position?

☛ What is the difference between quality assurance and quality control?

☛ Differentiate between product quality and process quality?

☛ What are the three measures in common use in Quality?

☛ How many types of reviews that we have in our testing? What is bad defect? why do we write bad defects?

☛ How to do each Quality inspector position task/function?

☛ How to control each task/function of Quality inspector?

☛ What are your strengths and weaknesses?

☛ Give examples of metrics to control the efficiency of the testing suppliers.

☛ What are the benefits of Quality Management System?

☛ What are Six mandatory Quality procedures?

☛ What are top 3 skills for Quality inspector?

☛ How to measure job performance of your position: Quality inspector?

☛ What made you choose to apply to Quality inspector?

☛ What are key tasks for Quality inspector?

☛ What have you learned from your past jobs that related to Quality inspector?

☛ Why did you leave your last job?

☛ What do you know about this company?

☛ What is the most recent skill you have learned that related to your Quality inspector position?

Is this answer helpful? 0 Yes | 0 No

Answer This Question

100 views

19⟩ Phone Based Quality Control Inspector interview questions

☛ What is your greatest achievement outside of work?

☛ What is good customer service?

☛ Do you have the qualities and skills necessary to succeed in your Quality Control Inspector career?

☛ Example of adaptation to changes and the difficulties.

☛ How did you react when faced with constant time pressure?

☛ What are key tasks for Quality Control Inspector?

☛ What is your greatest failure, and what did you learn from it?

Highlight past situations where you've managed frustration effectively. Consider opportunity and responsibility as components of success.

If you have changed careers make a logical argument as to why you did so.

Is this answer helpful? 0 Yes | 0 No

Answer This Question

126 views

20⟩ Informational Quality Control Inspector interview questions

☛ What have you gained from your Quality Control Inspector work experiences?

☛ What is the most recent skill you have learned that related to Quality Control Inspector?

☛ What is the difference between a manager and a leader?

☛ What was your major disappointment?

☛ Have you handled a difficult situation with a co-worker? How?

☛ What are your salary increases?

☛ Do you work better under pressure or with time to plan and organize?

Is this answer helpful? 0 Yes | 0 No

Answer This Question

121 views

Quality Assurance

Home Quality Assurance Quality Assurance

113 Quality Assurance Questions And Answers

1⟩ Do you know what are inspection points for a cable tray installation?

2⟩ What is what is schedule Q?

3⟩ Tell me how do you determine the correct installation of flow orifice?

4⟩ Explain how validation activities should be conducted?

5⟩ Explain me a decision you made that wasn't popular and how you handled the negative feedback?

6⟩ Tell me when to start QA in a project?

7⟩ Explain what is validation and verification in software testing?

8⟩ Do you know what does the software QA document should include?

9⟩ Tell us as a Quality Control Inspector, what keeps you motivated to always give your best work?

10⟩ Explain what is difference between QA, QC?

11⟩ What is the basic responsibilities of a QA/QC personal?

12⟩ Tell me what are inspection points for cable laying?

13⟩ What is an ITP?

14⟩ Explain what are the main job duties and responsibilities of quality control systems manager employee?

15⟩ Tell me what is branch testing and what is boundary testing?

16⟩ Tell me what is a 'USE' case and what does it include?

17⟩ Explain me about a time when you have had to make a big decision, such as shutting down a production line. How did you come to the conclusion and how did you proceed?

18⟩ Basic Inspector QA/QC Job Interview Questions

19⟩ Phone Based Quality Control Inspector interview questions

20⟩ Informational Quality Control Inspector interview questions

Quick Links:

Quality Assurance

Home Quality Assurance Quality Assurance

113 Quality Assurance Questions And Answers

1⟩ Do you know what are inspection points for a cable tray installation?

2⟩ What is what is schedule Q?

3⟩ Tell me how do you determine the correct installation of flow orifice?

4⟩ Explain how validation activities should be conducted?

5⟩ Explain me a decision you made that wasn't popular and how you handled the negative feedback?

6⟩ Tell me when to start QA in a project?

7⟩ Explain what is validation and verification in software testing?

8⟩ Do you know what does the software QA document should include?

9⟩ Tell us as a Quality Control Inspector, what keeps you motivated to always give your best work?

10⟩ Explain what is difference between QA, QC?

11⟩ What is the basic responsibilities of a QA/QC personal?

12⟩ Tell me what are inspection points for cable laying?

13⟩ What is an ITP?

14⟩ Explain what are the main job duties and responsibilities of quality control systems manager employee?

15⟩ Tell me what is branch testing and what is boundary testing?

16⟩ Tell me what is a 'USE' case and what does it include?

17⟩ Explain me about a time when you have had to make a big decision, such as shutting down a production line. How did you come to the conclusion and how did you proceed?

18⟩ Basic Inspector QA/QC Job Interview Questions

19⟩ Phone Based Quality Control Inspector interview questions

20⟩ Informational Quality Control Inspector interview questions

BE THE FIRST TO KNOW

Quick Links: