Electric Mechanic

Interviewers who ask this question want to get a sense of your thoughts on how people you have worked with in the past view you as a team member. Be prepared to list and describe a few of your key traits from the perspective of someone who has spent time working side-by-side with you. Include items specific to your job capabilities as well as your approach to work, such as whether you are a team player or prefer working independently and if you are hard-working, loyal and tenacious when it comes to solving problems.

Interviewers sometimes ask about what might seem like very basic knowledge to weed out people who lack the foundational knowledge necessary to succeed in the job. Be prepared to explain key concepts relevant to the work of an electrician to demonstrate that you have an understanding of the work and what it involves. If you happen to get asked a question that you don't know the answer to, you still might be fine if you can explain to the interviewer how you would approach finding the answer if faced with a need to know the information in the field.

I received extensive on-the-job training in my first position right out of university. I had a powerful mentor who allowed me to work by his side every day for six months. The most valuable lesson I learned during this on the job training was the blueprint and schematic reading and analysis.

It is the property of a cable by virtue of it can withstand the applied voltage without rupturing it is known as insulation level of the cable.

Employers will want to know if you have the right skills and credentials to work as a professional electrician. Mention any relevant certifications, licenses and education, as well as any experience from previous jobs that specifically pertain to an electrician's job.

Be prepared to quote a realistic salary expectation for the position that you are applying for. Use your knowledge about the profession and the company to make a request that meets your needs while also being reasonable.

Mainly transformer has high inductance and low resistance.In case of DC supply there is no inductance ,only resistance will act in the electrical circuit. So high electrical current will flow through primary side of the transformer.So for this reason coil and insulation will burn out.

MCB is miniature circuit breaker which is thermal operated and use for short circuit protection in small current rating circuit. MCCB moulded case circuit breaker and is thermal operated for over load current and magnetic operation for instant trip in short circuit condition.under voltage and under frequency may be inbuilt. Normally it is used where normal current is more than 100A.

The water is obtained in the boiler and the coal is burnt so that steam is obtained this steam is allowed to hit the turbine , the turbine which is coupled with the generator generates the electricity.

If you are new to the electrical trade or are applying for an apprenticeship, you will probably be asked this question. Employers ask this question because they want to hear about your motivations and goals so that can be sure that you really have an interest in the field.

AVR is an abbreviation for Automatic Voltage Regulator. It is important part in Synchronous Generators, it controls theoutput voltage of the generator by controlling its excitation current. Thus it can control the output Reactive Power of the Generator.

If the voltage between the two phase is equal to the lamp voltage then the lamp will glow. When the voltage difference is big it will damage the lamp and when the difference is smaller the lamp will glow depending on the type of lamp.

(1). The main advantage of using the star delta starter is reduction of current during the starting of the motor.Starting current is reduced to 3-4 times Of current of Direct online starting.

(2). Hence the starting current is reduced , the voltage drops during the starting of motor in systems are reduced.

Depending on the type of job you are interviewing for (industrial, residential or commercial), you might be asked why you are interested in that aspect of the field and not others. Be prepared to explain why you are seeking the particular type of position the interview is for.