Pilot

  Home  Aerospace  Pilot


“Pilot related Frequently Asked Questions in various Pilot job Interviews by interviewer. The set of questions here ensures that you offer a perfect answer posed to you. So get preparation for your new job hunting”



29 Pilot Questions And Answers

1⟩ What are the requirement to become a Professional Engineer (PE) in the field of Aerospace?

Professional Engineer license is required for people who aspire to go in as officially approved engineer. The design specification is done by self-employed people or working in small business. General aerospace engineers work for government or for big companies and hence few people are not very keen on becoming PE?s. To become a PE one has to pass an exam on fundamentals of engineering which takes alot of hours to gruel and work under a licensed PE for about four years. In addition, they have to grow through a principle and practice of engineering exam, which requires about 8 hours.

 202 views

2⟩ What you know about Aerodynamics/performance analysis?

Aerodynamics/performance analysis in military programs include responsibility like analyzing aerodynamics impacts which effects from external modifications, developing mission profiles based on requirements from the customer, performance data of the mission which includes take off and landing details, en route and mission data performance. Analyze the configurations using the dynamics, which are fluid and computational.

Additional task may include support for wind tunnel planning for test flight. Documentation, test support, data analysis should be done on regular basis. Co ordination of aerodynamics with multi discipline teams and data should be provided for support flight management system or mission planning software.

 161 views

4⟩ Does knowledge of mathematics of science is required to get into aerospace engineering?

The basic understanding of Math is important, as it is not used at all the time during the course of aerospace engineering. One should have a basic understanding of mathematical definitions and knowledge on computers is very important as the computer programs will help in doing simple calculations and verify the results are reasonable.

However, on the science front it is very important to have a very good understanding on various subjects like dynamics and mechanics in physics, strong emphasis on chemistry, electromagnetism. For a good engineer one should know how law of forces makes things happen. In addition, if you are good at physical sciences when opposed to life sciences like biology you will be a fit candidate for aerospace engineering.

 182 views

5⟩ List the three tactical elements of electronic warfare?

► Electronic warfare has three main elements:

ES - Electronic support - This has high passive acquisition intelligence about friend and foe

EA - Electronic attack - that has passive and active denial of RF spectrum

EP - Electronic protection protects friendly personnel and assets by active and passive techniques.

 172 views

7⟩ What you know about differences between Aeronautical Engineering and astronautical engineering?

Aeronautical engineering works on tunnel tests, analyzing flight test data, manned space flights, planning future space missions, spacecraft operations, designing and testing robotic systems, developing new propulsion system, computing optimum flight trajectories, developing communication systems for distance space probes and designing new rockets.

Astronautical engineer includes designing power systems for spacecraft structure, developing communications systems for distant space probes, developing hardware skills for operations in spacecraft, designing and testing robotic systems, developing new propulsion systems and computing optimum flight.

 164 views

8⟩ Who are the aerospace engineers?

Aerospace Engineers are involved in all aspects of aeronautics (working with aircraft) and astronautics (working with spacecraft). They conduct research, and design and develop vehicles and systems for atmospheric and space environments. These engineers often specialize in one of many areas such as aerodynamics, propulsion, flight mechanics, orbital mechanics, fluids, structures, guidance & control, and computation.

 178 views

9⟩ What another kind of jobs expect pilot are available for an aerospace engineer?

The field of aerospace technology offers a wide range of employment opportunities to those with the proper educational background. An aerospace team is made up of engineers, scientists, and technicians. Positions are available through the private sector as well as within the U. S. Government. Examples of major engineering roles in the aerospace industry include:

►Analysis

►Design

►Materials and Processes

►Systems Engineering

►Software Development

►Manufacturing

►Flight Research

►Field Service

 176 views

10⟩ Where SPICE was developed?

This is the widely used analog simulator, which was developed at electronics research lab of California University.

 163 views

11⟩ What is aerospace engineering what education will I need?

Generally, a Bachelor's Degree in Aerospace Engineering is required to work as an aerospace engineer. The University of Texas offers this degree as well as Master's and Doctorate programs. Successful aerospace engineers have the proper educational background, possess good communication skills, and are committed to being a part of a team.

 176 views

12⟩ What you know about history of aerospace engineering?

This branch of engineering was unheard of until the Wright Brothers made their historic flight in 1903. After this event, major developments took place in the field of aeronautical engineering, which basically deals with everything related to aircraft's. During the First World War, many new aircraft's and missiles were developed for military purposes and this gave further boost to its growth.

The study of space was also included in aerospace engineering only in 1958. This expanded the scope of aerospace engineering and gave it a greater chance for taking risks and putting innovative ideas into action. The progress of this branch of engineering is being overseen by many major aerospace corporations like Airbus, Boeing, Honeywell, Embraer, etc.

 172 views

13⟩ What are the main steps that required to solve the problems of aircraft flying high and at very large speed?

There are various steps required to solve the problems of aircraft flying high and at very large speed are as follows:

► Build stiff wings that allow and provide the resistance to torsional diversion beyond the maximum speed of the aircraft.

► Use two sets of ailerons and one outboard pair that can be operated at low speeds.

► Use of one inboard pair that can be used to operate on high speeds, this will have less twisting impact when the ailerons are positioned outboard.

► Use spoilers that can be positioned independently or can be paired with ailerons. These reduce the lift on the down going wing by interrupting the airflow over the top surface.

 174 views

14⟩ Which characteristics that keep solid and fluid different?

► When the force is applied tangentially on solid then it experiences a finite deformation and shear stress that is proportional to the deformation. Whereas, when the same shear stress is applied on the surface of fluid then it experiences continuous increasing deformation where, the shear stress is proportional to the rate of change of deformation.

► The fluid dynamic is dividend in three different areas. They are as follows: Hydrodynamics (flow of liquids), Gas dynamics (flow of gases) and Aerodynamics (flow of air). Whereas, the state of, solid doesn't represent any of the stages.

 174 views

15⟩ Explain the functions performed by rudder?

The rudder is involved in providing the movement to the ports that gives a lift force to starboard. This will allow the aircraft to turn and uses the ailerons effectively to bank the aircraft by minimum use of rudder. The functions performed by rudder are as follows:

► It is used with different applications that are involved in taking off and landing to keep aircraft straight.

► Providing assistance that is, limited only for the aircraft to turn correctly.

► Used in applications during spin to reduce the roll rate of the aircraft and there are some applications that provides low speeds and high angles to allow the raising of the wings.

 174 views

16⟩ Which criteria need to be followed for an aircraft to be longitudinal statically stable?

The criteria that are required for an aircraft to be longitudinal statically stable, is:

► To have a nose-down pitching disturbance that is used to produce the aerodynamics forces to give a nose-up restoring moment.

► This restoring moment that is produced should be large enough to return the aircraft to its original position after the disturbance.

► The requirements are met by using the tail-plain that is horizontal stabilizer used to provide the stability to the aircraft.

 180 views

17⟩ What sources are involved in aerodynamics?

There are two sources that are involved in the case of aerodynamics forces and moments that are on the body. These forces are as follows:

► Pressure distribution:

This is the distribution that is over the body surface

► Shear stress distribution:

This is the distribution that is over the body surface

These sources are for the body shapes and it doesn't matter how complex they are. The mechanism that is being used to communicate with the bodies that is moving through a fluid. Both the pressure (p) and shear stress (?) having the dimension force per unit area. This helps the movement of the body through the fluid.

 177 views

18⟩ Explain the objectives of aerodynamics?

Aerodynamics deals with the theory of flow of air and it has many practical applications in engineering. There are some objectives that are being used in aerodynamics and these are as follows:

► It is used to predict the forces, moments and heat transfer from the bodies that is moving through the liquid.

► It deals with the movement of wings or use of the wind force. This way it requires the calculations to be done for the aerodynamic heating of the flight vehicles and the hydrodynamic forces applied on the surface of the vehicle.

► It is used to determine the flows that are moving internally through ducts. This way it makes the calculations and measurement of the flow properties that is inside the rocket and jet engines.

 180 views

19⟩ What is the main source of power in aircraft?

The main source of power is the hydraulic motor that is provided by the scheduled service and involves operations that allow technicians to solve complex system problems. This setup required certifying the technician to operate all the system the same way as it is been done with one system. The hydraulic motor needs to be operated the same way and maintained in a proper way. The alignment need to in synchronization with the aircraft auxiliary power unity (APU) before anything is done with the aircraft positioning. A standard need to, be followed to maintain the aircrafts and its parts equipped and working.

 167 views

20⟩ Define stress analysis?

People working on these areas as an aerospace engineer should have familiarity and exposure to NASTRAN and MAT LAB with knowledge on space environment and modeling of flexible dynamics. These aerospace engineers will be responsible to conduct stress analysis on metallic and composite structures. NASTRAN, IDEAD, Oracle, and PATRAN proficiency level is required. Their duties also include on aircraft, which are metallic and composite structures. This includes and understanding of control surface stiffness and loop calculations, finite element modeling (FEM), fatigue testing requirement and analysis.

 165 views