61⟩ Tell me what is the minimum fillet size in socket weld?
Minimum 3 mm fillet size.
Construction Welder
Home Construction Construction Welder
“Construction Welder based Frequently Asked Questions in various Construction Welder job interviews by interviewer. These professional questions are here to ensures that you offer a perfect answers posed to you. So get preparation for your new job hunting”
100 Construction Welder Questions And Answers
62⟩ Tell me what is meaning for SAES, SAEP and SAMSS?
Saudi Aramco Engineering Standards
Saudi Aramco Engineering Procedures
Saudi Aramco Materials System Specification
63⟩ Do you know what are the defects we can find in visual Inspection?
Porosity,Undercut,Surface crack (HIC),Side wall fusion on fusion boundary.
64⟩ Tell me what is the meaning for ASME?
American Society for Mechanical Engineering
65⟩ Do you know what is the standard for Structural steel fabrication?
AWS D1.1
66⟩ Tell me how much area is required for Pre-heat?
75 mm minimum from both end of the Joint.
67⟩ Tell me what is the standard for Process (or) Plant piping systems?
ASME B 31.3
68⟩ List out the equipment’s that Iron and Steelworker use?
Equipment’s that iron and steel worker use are
☛ Reinforcing bars
☛ Lumber
☛ Cranes
☛ Derricks
☛ Rivet tools
☛ Large concrete buckets
69⟩ Explain how do you prioritize your work when you have multiple projects to complete?
First off all I want to see the project and divide by req demand and after I start my work.
70⟩ Tell us why we are baking the electrodes?
To remove the moisture content from the Electrodes.
71⟩ Tell me what is the precaution that connectors should take to prevent an accident?
Connectors connect the steel structures with each other. To prevent an accident connector must do following things immediately
☛ Keep your eyes of arriving steel structure without distracting anywhere else and guide it to its correct location
☛ To match up holes always use a wrench or a drift pin, never use your fingers, many have lost their finger doing this
☛ The beam must be bolted, so that it will not rotate, before being cut loose.
72⟩ Where do you see yourself in five years as Construction Welder?
Within the company in a managerial role as a welding engineer with my collegues.
73⟩ Tell me how workers hoist the steel bar in its position?
☛ First they attach iron or steel bar with cables of derricks or crane
☛ One worker will guide the crane or derrick operator with hand signals to move to its position, while another worker will hold the rope attached to the bar to stop it from swinging
☛ Slowly the crane will move structure to its position and once placed workers will check for alignment with the help of plumb bobs
☛ Once the alignment is done, they weld or bolt the bar permanently
74⟩ Explain me what is turnkey integration?
Turnkey integration gets its name from being all-inclusive and production-ready.
Robot workcells are turnkey integration systems because they require little installation and have every necessary element: robot, safety, tooling, etc. Turn a key or flip a switch, and presto – you’re automated!
Interested in a robotic turnkey integration system for your facility? RobotWorx is a turnkey integration expert. We build custom turnkey workcells to answer specific application needs. Avoid delays and costly mistakes when you buy a turnkey integration system.
75⟩ Explain what all things must be inspect for sling used in iron and steel structure?
☛ Severe damage to wires
☛ Broken wires
☛ Look for heat damage
☛ Look for wear and tear due to bad weather
☛ Deformed, crushed or worn end attachments
☛ Illegible or missing sling identifications
☛ Kinking or crushing of ropes
76⟩ What is WPS (Welding Procedure Specification)?
WPS stands for Welding Procedure Specification. A WPS is a written document that provides direction to the welder or welding operator for making production welds in accordance with code requirement.
77⟩ Tell me what is your greatest weakness as Construction Welder? What are you doing to improve it?
I'm believable person on any man but it's become some time dangerous so I take a own decision and improve it.
78⟩ Explain me recently, tell me a problem you faced where you were unsure the answer. How did you research the problem and find a correct solution?
I was unsure of the type of process that was calling for and I used the internet and the AWS website to verify and validate that the process would work and using upon my own personal experience. I also went ahead and tried out the process before we went ahead and used it to ensure that process would work and yeild the results that we wanted.
79⟩ Explain an example of a time when you made a mistake because you did not listen well to what someone had to say?
This was when I was much younger and I had to repaint a entire vehicle, by not clarifying what the process was to be and assuming that I understood. Now before I do something I always make sure that I understand what is being said and regurgitate the information back to make sure that is what was communicated.
80⟩ Tell me what care has to be taken while operating power tools?
While, operating power tools following thing has to be taken care
☛ Maintain and inspect power tools on a regular basis
☛ Discard defective tools
☛ To avoid accident tool must be provided with “dead man” trigger or power off switch
☛ Use only those tools that are certified
☛ Avoid using any rotatory screw with a protruding set screw that can catch current
☛ Do not keep any tool hanging or swaying out of your pocket exposed to electric wire or tool
☛ Do not rely on wire, rods or other makeshift material, right tool should be used to do the job
