⟩ Tell me what is the primary step to unclog any blockage in the pipes?
First and primary technique to unclog the blockage is to pour hot water through the pipes. If the blockage still remains then, you need to use other options.
Question and Answer:
Home Plumber
- Share
Popular Answers:
* There is no answer to the above question yet.
More Questions for you:
Side rake angle of a single point cutting tool is the angle A. by which the face of the tool is inclined towards back B. by which the face of the tool is inclined sideways C. between the surface of the flank immediately below the point and a plane at right angles to the centre line of the point of the tool D. between the surface of the flank immediately below the point and a line drawn from the point perpendicular to the base
Segmental chips are formed during machining A. mild steel B. cast iron C. high speed steel D. high carbon steel
Cemented carbide tool tips are produced by powder metallurgy. A. True B. False
If the diameter of the hole is subject to considerable variation, then for locating in jigs and fixtures, the pressure type of locator used is A. conical locator B. cylindrical locator C. diamond pin locator D. vee locator
A single point thread cutting tool should ideally have A. zero rake angle B. positive rake angle C. negative rake angle D. point angle
Internal gears can be made by A. hobbing B. shaping with pinion cutter C. shaping with rack cutter D. milling
Cast iron during machining produces A. continuous chips B. discontinuous chips C. continuous chips with built-up-edge D. none of these
Drilling is an example of A. orthogonal cutting B. oblique cutting C. simple cutting D. uniform cutting
The silicon carbide abrasive is chiefly used for grinding A. cemented carbide B. ceramic C. cast iron D. all of these
A round nose tool may be fed either from left to right end or from right to left end of the lathe bed. A. Yes B. No
