Role Specific Plumbing Interview Questions

RenDC

» Interview Questions and Answers » Questions » News Feed » Tutorials » rendc.com

Question and Answer:

Home Plumber

⟩ Role-specific Plumbing Interview Questions

☛ What experience do you have with snaking clogged pipes?

☛ Do you prefer your water mains to be PVC or copper?

☛ What advantages do PVC water mains provide?

☛ Have you ever installed a shower with multiple shower heads? How did you keep water pressure high?

☛ What are the advantages for installing steel plumbing underneath a sink? In what cases would you do it?

☛ Tell us about one downside of a conventional water heater. Would you suggest an alternative?

Is this answer helpful?
0 Yes | 0 No

173 views

More Questions for you:

The work or surface speed for cylindrical grinding varies from

A. 5 to 10 m/min
B. 10 to 20 m/min
C. 20 to 30 m/min
D. 40 to 60 m/min

A fine grained grinding wheel is used to grind hard materials.

A. Correct	
B. Incorrect

Drilling is an example of?

The velocity of tool relative to the work piece is known as cutting velocity.

A. True	
B. False

Grinding wheels should be tested for balance

A. only at the time of manufacture
B. before starting the grinding operation
C. at the end of grinding operation
D. occasionally

Larger end cutting edge angle __________ tool life.

A. increases
B. decreases
C. does not effect

Which of the following statement is incorrect with reference of lathe cutting tools?

A. The flank of the tool is the surface or surfaces below and adjacent to the cutting edges
B. The nose is the corner, arc or chamfer joining the side cutting and the end cutting edges
C. The heel is that part of the tool which is shaped to produce the cutting edges and face
D. The base is that surface of the shank which bears against the support and takes tangent pressure of the cut

The cutting in a milling machine is mounted on.?

In hot machining, tool is made of

A. tungsten carbide
B. brass or copper
C. diamond
D. stainless steel

In ultra-sonic machining, the metal is removed by

A. using abrasive slurry between the tool and work
B. direct contact of tool with the work
C. maintaining an electrolyte between the work and tool in a very small gap between the two
D. erosion caused by rapidly recurring spark discharges between the tool and work

rendc.org

Whether it is technological solutions or user-oriented innovations, We have put together for you the best sources of HR Interview Questions and Answers, Tech Ideas, and Programming Tutorials."

Quick Links:

Interview Question and Answer Questions Add Questions News-Feed Add Posts HR Hacks Tutorials Profile rendc.com memeph.com

Question and Answer:

Home Plumber

⟩ Role-specific Plumbing Interview Questions

Popular Answers:

* There is no answer to the above question yet.

More Questions for you:

Quick Links:

Question and Answer:

Home Plumber

⟩ Role-specific Plumbing Interview Questions

Popular Answers:

* There is no answer to the above question yet.

More Questions for you:

BE THE FIRST TO KNOW

Quick Links: