Generator Operator

The shunt connection in four point stater is provided separately form the line where as in three point stater it is connected with line which is the drawback in three point stater

Being a mechanical engineer I always wanted to work in an environment that provided me with some big opportunities. The career of a power plant operator needs skills as well as experience which I feel I have in me and hence I decided to take a career as a power plant operator.

ENG THRUST (L or R). FCOM 1 70.20.16

It depends on the type of plant and the application the tower has to deal with it.

Heat plays a mojor role in turbine, incase of absence of heat the turbine blades may got damage due to formation of rust. If there is no heat in steam means it has a moisture. So we need the heat.

I will manage the stress by means of sorting out the things based on those importance and I planned to complete the work with in the time limit with well planned mentality.

For lighting loads, neutral conductor is must and hence the secondary must be star winding. and this lighting load is always unbalanced in all three phases. To minimize the current unbalance in the primary we use delta winding in the primary. So delta / star transformer is used for lighting loads.

Bus bars and isolators are rated for continuous power flow, that means they carry heavy currents which rises their temperature. so it is necessary to test this devices for temperature rise.

If the voltage between the two phase is equal to the lamp voltage then the lamp will glow. When the voltage difference is big it will damage the lamp and when the difference is smaller the lamp will glow depending on the type of lamp.

A. A d.c. generator whose field magnet winding is supplied from an independent external d.c. source (e.g., a battery etc.) is called a separately excited generator.

To work in a plant in which you begging to love and take ownership of and treat every piece of equipment like a patient.

Then fan after boiler with flue gas will have induced draft, and the fan that has duct connecting to boiler will be the forced draft.Forced draft will give positive pressure to boiler and induced will give negative draft to the boiler.

Your job with them will be to play a role leading from the front. Ask them about what all opportunities will you get with this job. Also ask them about what safety measures the company take does for an employer such as insurances, medical expenses, etc. incase if there is a hazard in the power plant.

A boiler feed pump takes away one third part of the energy generated by the power plant.

CHP & stock yard, crushers, coal conveyors, wet or dry ash disposal, ash slurry disposal units, ash pond, LDO HFO oil elevations.

Match up the generator with the 500 KV line voltage so you're not back back to the generator reverse power.

Stepper motor is the electrical machine which act upon input pulse applied to it. it is one type of synchronous motor which runs in steps in either direction instead of running in complete cycle.so, in automation parts it is used.

At the time of motor taking normal current (rated current)the speed of the motor is called rated speed. It is a speed at which any system take small current and give maximum efficiency.

It will be an opportunity for me to use my skills and experience to contribute to the success of the company. It is very satisfying to be part of a successful organisation.

CHP & stock yard, crushers, coal conveyors, LDO HFO oil elevations, ash slurry disposal units, ash pond, wet or dry ash disposal.