Safety Officer

This question is designed to see how you balance ethics, professional responsibility, and common sense. A good answer might sound something like this: “If it were a minor technical violation that was unlikely to result in injury, I might give the manager 24 hours to fix it. At that time, I’d do another inspection. If it were a major hazard, however, I’d have to refuse to ignore it.”

It is defined as a harmful condition sustained by the body as a result of an accident.

The process of removing rust dust, dirt, scales and old prints from the old surface using compressed air is called sand blasting.

1. The operators should wear face shields or safety glasses

2. Power tools should be placed in the store room after use

3. power tools should have protected by guards

4. Pneumatic hoses or electric cables of power tools should not pass through passage ways.

5. The electrical power tools should be properly earthed

6. Never horse play with hose of pneumatic tools

7. Power tools machines should be maintained and operated properly.

1. Mechanical hazards — in adequately guarded machines parts

2. Chemical hazards — of toxemic gasses, vapours, fumes, smoke in dust.

3. Electrical hazards : in adequately insulated line wires

4. Fire hazards – chemical reaction, electrical Arcs

5. Radiation hazards – dazzing light in fraved rays ultra violet rays

6. Pollution — water pollution & noise pollution

☛ A personal injury occurs only as the result of an accidents

☛ An accident occurs only as the result of a unsafe action or un safe mechanical or physical conditions or both.

☛ Unsafe action or unsafe condition or mechanical or physical condition exist only because of faulting the part of persons.

☛ Fault of persons acquires from the environment and the causes for lack of knowledge or skills or improper attitude.

1. The safety and heath of all employees is one of prime concerned of the company.

2. Every company will be require to the policy both in letter and in spirit.

3. the company shall comply straightly with act, laws, rules and regulations

4. The company shall impart raining in health safety and occupational health to all employees.

5. The company will adopt own safety and health standards where laws may not be available.

Safety management is an art and science of setting safety objectives of the Industrial company and related activities of planning, administration, Improving, Various functions to achieve the safety objectives.

☛ Major injury

☛ Minor injury

☛ No injury

1. Inadequate skill, improper supervision etc.

2. Rapid industrialization

3. Expansion of exiting factories

4. Setting up new industries involving hazards not known earlier

☛ 3 copies of the permit

☛ At the work site.

☛ In the permit file

☛ On the permit board.

☛ Adequate and suitable washing facilities should be provided

☛ Facilities for sitting during rest hours should be provided

☛ If more than 250 workers are employed in a factory a canteen facility shall be provided.

☛ Shelters rest rooms and drinking water shall be provided.

☛ Welfare officer shall be employed where than 50 workers are working.

Up wanted sound which causes irritation to the ears caused by mechanical movement.

☛ Barricade the area

☛ Remove all un-necessary persons away from site

☛ Check radiation level with dosimeter

☛ Use lead shields

☛ Put a sign board

☛ Risk tissue damaged

☛ Use special filter glass

☛ Use lead coated aprons

☛ It is considered as maximum allowable concentration not to be exceeded at any time during 15 minutes continuous expose period.

☛ It is a maximum on concentration to which works or can be exposed to a period of to15 minutes continuously without suffering from irritation.

a. Lack of knowledge and skill

b. over work

c. Feeling of dizziness

d. Non usage of PPEs like safety belt cygnet

e. Unsafe platform (Not covered having floor openings)

f. Improper erecting

g. Unlearning work at height?

1. Follow all traffic rules, signs and signals

2. Do not exceed the speed limit

3. Take ten minute break after every 2 hours on long driving

4. Drive in correct gear

5. Keep both hand on steering wheel

6. Do not drive if you are not filling well or feting sleep

7. Slow down while passing junctions, corners, crowded places and parking

A blanket permit is a permit issued on the basis of location where the multiple jobs are to be carried out at safe location.