Safety Officer

One without the other is not potent enough for many situations so I would consider both very important. Training is a prerequisite and experience is comes with time. They cannot be compared or used interchangeably.

A safety audit is a workplace screening process that indicates any unsafe working conditions and recommends corrective measures. Is operates on measurements, analysis and testing.

☛ Fire protection

☛ Fire prevention

☛ Quantity control

☛ Preventive Maintenance

1. Danger due to fire/ explosion

2. Danger due to toxicity

1. Stand at safe distance from the load

2. Sharp edge and burns are removed before lifting a material.

3. PPE such as safety gloves and safety shoes are to be used.

4. If the weight is too heavy for one person to lift, then he has to seek the assistance.

5. The pathway is not blocked by obstacles while carrying the load.

6. The different actions, movements and forces necessary while carrying the load.

7. Modify the task by using hooks and crow bars.

8. Mechanical equipments like cranes shall be used.

9. Modify the objects

10. Change the way things are used.

The process of joining of metals either by electrical or by gas is called welding.

Biggest hazard that applies to construction sites is that of collapse. This is avoided through proper and secure scaffolding at sensitive structural points.

It is a safety date collecting technique and carried out to promote full employee co-operation condition in the implementation of the company’s safety surveys.

1. Date and time

2. Activity

3. What happened

4. Person involved

5. What went wrong

6. Causes

7. Corrective action suggested

8. Signature

9. Safety officer

10. Safety in charge

11. Project manager

I am a good manager, highly organized and possess very good communication skills.

OS & H policy, educational training, safety manual and rules, new equipments, safety inspection, machine guarding, material handling safe operating procedures noise.

1. Proper wheel shall be used a per the grinding M/c’s specification

2. All the grinding M/c’s shall be used with wheel guard

3. Grinding cables shall not mingle with welding cables

4. All the cables shall be protected from damage

5. Provide face shield with safety helmet

6. Never use fracture wheel

7. Excessive tighting of maintaining is dangerous

8. All guards should be in position before the machine operated

9. The speed of the grinding should match in the speeds of the grinding machines

10. Only skill person should be handle this work

11. Testing of wheel is necessary

I would say paying extra attention to details might be my weakness. I am highly cautious and do not sit back until I have thoroughly understood and figured out strategies to carry out things which sometimes over burdens me but in a way helps me perform better as a security officer.

It is protection of living beings under electro charging by fast isolation from the live conductor to avoid permanent disability or death.

Marking a hole or tunnel by digging the ground by man or machine is called excavation.

1. Wooden board not be painted

2. Wooden board should not to any cracks

3. Check for rust in pipes / clamps

4. Clamps should fixed and good quality

5. Boards thickness should be 3.4 cms and no bending

6. The construction must be rigid, properly based

7. Use of good and sound materials

8. The wooden bellies has not joints

9. Vertical poles should not be more than 6 feet

10. Chains, ropes used for the suspension of scaffoldings

11. Never throw any materials from height

12. Use safety harness while working at above 6 feet

13. Properly ties to be arrangement

☛ Mandatory

☛ Information

☛ Fire or explosion

☛ Caution

☛ Wiring

Evacuation. I would want every living being inside the building to safely step out and run as far away from the building as possible.

☛ Presence of toxic,

☛ High temp.

☛ Excessive noise

☛ Emission of radiation

☛ Improper lighting

☛ Improper ventilation

☛ Process involving handling of poisonous.

1. Cutting fingers due to sharp edges

2. Burns due to handing of hot articles

3. Foot injuries due to dropped articles

4. Slipped disc due to improper posture in lifting on object

5. Strains to wrist or fingers

6. Sprains, wounds hernias, fractures