Safety Officer

1. Select the right ladders forth job

2. Inspect ladder before you see it

3. Setup the ladder with care

4. Climb in carefully

5. Use safe practices

1. Proper design, operation and maintenance

2. Avoid leakage

3. Steel pressure cylinder

4. Vapor release is to be directed away from heat sources

5. Wear goggles and SCBA sets

Direct cause:

☛ Unsafe act

☛ unsafe condition.

Indirect Cause:

☛ Lack of knowledge or skill

☛ Improper attitude

☛ 3Physical or mental deficiency

1. It helps to identify hazards and prevent accident

2. It helps to establish safe work method, working conditions and suitable plant safety rules

3. It helps to asses the safety training four heading can be used for JSA.

4. It helps to inspection the plant

a) Name of operation for JSA

b) Description of the operation

c) Hazards

d) Precautions

1. Fall of person from top and getting injured

2. Fall of objects from top and below person injury

3. Fall of materials from top and damaged

4. Person fall into excavated pit

5. Collapse of soil and below person get injury or may

6. Damage of UG cables and sewage pipe

7. Collapse of scaffolding and person fall from height, get injury

8. Electrical shock

9. Fire and explosion

10. Burn injury

11. Health and lung problems

12. Snakes bite

13. Poisonous gas

14. Foreign body in eye

A tall machine used for moving heavy objects by suspending them from a projecting arm with hook.

It is an unexpected or unplanned event which may or may not result in injury or damage or property loss or death.

Safety is defined as a condition that is free from hazards while risk is the realization of a potential loss or injury.

Lathe is an equipment use for cutting, threading, millingor facing etc.

It is define as the limit of air bone concentration of substances under which personnel may be exposed for 8 hrs. per day without any adverse effect.

Firs aid is temporary and immediate care given to the victim of an accident.

Inspection means to fin out hazards according to checklist prepared with reference to the department operations by the people who are familiar with the plant.

Grinder is a portable machine with a wheel guard in position to reduced the danger.

It is an event which represents deviation from the intended sequence of designed steps.

This question is designed to tell your interviewer whether you and the company share the same priorities. There are two main ones, and as long as you mention both of them, you should be fine: to keep employees (and any visitors) safe and to protect the company from liability.

☛ Safety day – 4th March

☛ Fire Day – 14th April

☛ Hot Work – Red or pink

☛ Cold Work – Green

☛ Confined – Blue

☛ Radiography – Yellow

☛ Water type extinguisher – Red

☛ Foam type extinguisher – Cream (green)

☛ Co2 extinguisher Black

☛ DCR extinguisher Blue

It is legal requirements in case of emergency in violin vehicles carrying hazards substance.

The risk is control by following process they are eliminate, replace, reduce, control and PPE.

1. the truck should be inspected

2. The axles should be greased well

3. Safety shoes should be work by the operators.

4. The load should be balanced and the weight of the load should not fall on the axle

5. The hard cart should not be wider than the width of the hand truck.

6. The hard cart should be pushed and not pulled

7. The truck should not be placed on path ways.

House keeping means not only cleanness but also orderly arrangement of operations, tools, equipments storage facilities and suppliers.